Engine Accessories

Figure 7-34. Overall view of engine showing progress of engine assembly

at this point.

d. Cooling Fan Vanes and Cooling Fans. Refer to figures 4-35, 4-34, and 4-88.

7-17.

Engine Accessories

Refer to Table 7-13 for illustrations and assembly instructions. References are listed in

the table.

Table 7-13. Installing Engine Accessories

Component

References

F u e l Pump

Para

7-17a,

Figs.

4-3 through 4-1

Turbosupercharger and Lower Shroud Plates

Para

7-17b,

Figs.

4-33 through 4-18

Starter

Para

7-17c,

Figs.

4-8, 4-7, 5-1, 4-9, 4-4

Time Totalizing Meter

5-5, 5-4, 4-10

7-31, 4-17 through 4-13, 4-11

hooks of sling in engine lifting eyes and take up

a. Fuel Pump. Refer to figures 4-3 through 4-

the slack. Remove four bolts and flat washers

securing engine to overhaul stand bracket. Lift

Turbosupercharger and Lower Shroud

Plates. Refer to figures 4-33 through 4-18.

engine and move overhaul stand. Lower engine

c . Starter. Refer to figures 4-8, 4-7, 5-1, 4-9,

o n suitable blocks or moveable dolly maintaining

and 4-4 and (1) through (3), below.

lifting sling hook-up as a precaution against

engine tipping during remaining assembly

(1) Install starter while engine is still

m o u n t e d on overhaul stand (figs. 4-8 and 4-7).

operations.

(2) Install multiple leg sling - 4910-919-

(3) Install starter cradle and support on

2884 (fig. 5-1) on suitable chain hoist. Install

engine (fig. 4-9 and 4-4).

7-28