Figure 4-3. Removing or installing fuel pump

Remove

1. Remove

fuel pump (A) from pump adapter.

2. Remove

and discard mounting gasket (B).

Install

1. Position

new mounting gasket (B) on studs.

2. Position

fuel pump (A) on pump adapter.

Note. When installing fuel pump make sure

Disconnect

fuel pump shaft splines are properly alined with

1. Remove adapter (A) from pump outlet.

2. Remove connector (B) from pump inlet.

drive coupling before securing pump to adapter.

3. Remove four self-locking nuts (C) and flat washers

Figure 4-3. Removing or installing

securing fuel pump to adapter.

fuel pump.

Connect

1. Install four self-locking nuts (C) and flat washers

securing fuel pump to adapter.

2. Install connector (B) in pump inlet.

3. Install adapter (A) in pump outlet.

Figure

4-2.

Disconnecting

connecting

fuel

pump.

Remove

1. Remove hexagon head cap screw (A) and clip securing

starter jumper lead to solenoid.

2. Remove large starter jumper lead clip from terminal

(B).

Install

1. Position large starter jumper lead clip on terminal (B).

2. Position jumper lead on solenoid lug and secure with

clip and hexagon head cap screw (A).

Figure 4-4. Removing or installing starter

solenoid jumper lead.

4-3