CHAPTER 5. DISASSEMBLY OF ENGINE - TM-9-2815-200-350187

CHAPTER 5

DISASSEMBLY OF ENGINE

Section I. PREPARATION OF ENGINE FOR DISASSEMBLY

5-1. General

must be thoroughly drained, cleaned, and

s t r i p p e d o f external

accessories before

This section covers the preparation of the

proceeding with disassembly. Refer to Table 5-1

engine for disassembly. Refer to the pertinent

TM's covering the removal of powerplant from

for illustrations and instructions required for

the vehicle and separation of the transmission

draining engine oil and removing accessories.

from the engine. Prior to disassembly, engines

Table 5-1. Draining Engine Oil and Removing Engine Accessories

Engine and Sling

Oil Pan Drain Plugs

F u e l Pump

4-1 through 4-3

Starter

4-4 through 4-8

Time Totalizing Meter

Generator and Associated Parts

Turbosupercharger and Lower Shroud Plates

5-2. Drain Engine Oil

The engine oil must be drained from the

engine before engine is disassembled. Lift engine

using multiple leg sling - 4 9 1 0 - 9 1 9 - 2 8 8 4 ( f i g . 5 -

1) and place engine on suitable blocks. Drain

e n g i n e oil following instructions that accompany

Figure 5-1. Lifting engine using multiple leg

sling-4910-919-2884.

5-1