REMOVE AFT MOUNTING FLANGE

TM 9-2835-255-34

ENGINE REMOVAL FROM AND INSTALLATION IN SHIPPING

CONTAINER (Sheet 2 of 4)

2. REMOVE AFT MOUNTING FLANGE (1)

AND MOUNTING PIN (2) FROM ENGINE

(3), AND THEN INSTALL FLANGE (1)

AND PIN (2) IN CONTAINER (4).

a. Remove two bolts (5) and washers (6).

Remove pin (2). Hold flange (1).

b. Remove 12 screws (7) and washers (8).

Remove flange (1).

c. Position flange (1) on frame (9). Install

four screws (10), washers (11), and new

nuts (12).

d. Put pin (2) in support (13). Aline hole

(14) in pin (2) with rod (15). Screw rod

(15) in pin (2) just enough to hold pin (2)

in place.

3. REMOVE ENGINE/REAR MODULE

LIFTING SLING FROM ENGINE

Go on to Sheet 3

4-7