 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
E N G I N E / R E A R M O D U L E LIFTING SLING INSTALLATION AND REMOVAL
(Sheet 2 of 2)
2. INSTALL SLING (1).
a. Hook sling (1) on hoist hook (2). Set
turnbuckle (3) to its shortest length.
b. Place sling (1) over engine (4). Remove
pin (5) from shackle (6). Remove ring (7)
from shackle (6).
c. Put shackle (6) on mounting block (8) and
screw in pin (5).
d. Put bar (9) through two rear engine
lifting points (10). Put locking pin (11) in
each end of bar (9).
REMOVAL:
REMOVE SLING (1).
a. Lower hoist hook (2) until cables (12) are
slack.
b. Push in and hold button (13) and lift out
pin (11) from each end of bar (9). Remove
bar (9) from engine (4).
c. Remove pin (5) and shackle (6).
d. Put ring (7) in shackle (6) and screw in
pin (5). Unhook sling (1) from hoist hook
(2). Stow sling (1).
End of Task
4-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals