ENGINE REMOVAL FROM AND INSTALLATION IN SHIPPING CONTAINER (Sheet 1 of 4)

TM 9-2835-255-34

ENGINE REMOVAL FROM AND INSTALLATION IN SHIPPING CONTAINER

(Sheet 1 of 4)

TOOLS: General mechanic's tool kit: automotive (SC 5180-90-N26)

Combination wrench, 3/4-inch (Item 72, Appendix D)

Combination wrench, 1-5/16 inch (Item 19, Appendix D)

Deep style socket, l/2-inch drive, 3/4-inch (Item 43, Appendix D)

Hoist, 2-ton minimum capacity (Item 36, Appendix D)

SUPPLIES: Self-locking nut (Item 17, Appendix E) (8 required)

Wood block (Item 23, Appendix B) (3 required)

PERSONNEL: Three

EQUIPMENT CONDITION: Top weldment removed (page 4-1)

Engine/rear module lifting sling installed on engine (page 4-4)

REMOVAL:

WARNING

1. REMOVE ENGINE (1) FROM BOTTOM

WELDMENT(2).

a. Lift engine (1) just enough to

take engine weight off weldment (2).

b. Remove four self-locking nuts (3), washers (4),

and screws (5). Unscrew-rod (6) until

retaining ring (7) touches frame (8).

Lift engine (1) straight up and out of

weldment (2) and set on three wood blocks (9).

Go on to Sheet 2

4-6 Change2