 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
ENGINE REMOVAL FROM AND INSTALLATION IN SHIPPING
CONTAINER (Sheet 3 of 4)
INSTALLATION:
1.
REMOVE PIN (1) AND FLANGE (2) FROM
CONTAINER (3).
a. Loosen rod (4) until retaining ring (5)
touches frame (6). Lift pin (1) out of
support (7).
b. Hold flange (2). Remove four self-locking
nuts (8), washers (9), and screws (10).
c. Remove flange (2).
2.
INSTALL ENGINE/REAR MODULE
LIFTING SLING ON ENGINE (PAGE 4-4).
3.
INSTALL FLANGE (2) AND PIN (1) ON
ENGINE (11).
a. Position flange (2) on engine (11). Aline
holes in flange (2) with holes in engine
(11). Install 12 screws (12) and
washers (13).
b. Position pin (1) on engine (11). Aline two
holes in pin (1) with holes in engine (11),
and install two bolts (14) and
washers (15).
WARNING
4.
INSTALL ENGINE (11) IN
WELDMENT (16).
a. Position engine (11) over weldment (16).
Guide engine (11) to aline pin (1) with
support (7) and hole (17) with pin (18) in
frame (6).
b. Lower engine (11) in weldment (16).
Go on to Sheet 4
4-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals