Nozzle and Holder Assemblies, Cylinder Deflectors, and Shrouds

Nozzle

and

Holder

Assemblies,

Cylinder

Deflectors,

and

Shrouds

7-11.

Refer to

Table

7-7

for

illustrations

and

assembly

instructions.

References

are

listed

the table.

Table 7-7. Nozzle and Holder Assemblies, Cylinder Deflectors, and Shrouds

References

Component

Para 7-11a, Figs. 5-103, 4-165

Nozzle and Holder Assemblies

Para 7-11b, Figs. 5-102 through 5-97

Shroud Plates and Cylinder Deflectors

Camshaft Drive Shrouds and Cylinder

Fuel

Injector

Nozzle

and

Holder

Deflectors. Refer to figures 5-102 through 5-97.

A s s e m b l i e s . Refer to figures 5-103 and 4-165.

Note. Removal or installation of shrouds and

Note. When installing new gasket on nozzle

cylinder deflectors is the same for both left and

assembly, apply a thin coating of grease to the

right

banks

the

engine.

For

instructional

gasket to retain gasket in position on nozzle

purposes, the right bank shrouds and cylinder

assembly.

deflectors are illustrated.

Turbosupercharger

Oil

Inlet

Hose

and

Fire

Extinguisher

Tube,

Fuel

7-12.

Injection

Pump

Oil

Inlet

Hose,

and

Throttle

Control

Rods

and

Lever

Refer to Table 7-8 for illustrations and assembly instructions. References are listed in

the

table.

Table 7-8. Turbosupercharger Oil Inlet Hose and Fire Extinguisher Tube,

Fuel Injection Pump Oil Inlet Hose, and Throttle

Control Rods and Lever

Component

References

Turbosupercharger Oil Inlet Hose and Fire Extinguisher

Para 7-12a, Figs. 5-90 through 5-88

Tube

Fuel Injection Pump Oil Inlet Hose

Para 7-12b, Figs. 5-87 through 5-84

Throttle Control Rods and Intermediate Lever

Para 7-12c, Figs. 5-83 and 5-82

b. Fuel Injection Pump Oil Inlet Hose. R e f e r

Turbosupercharger

Oil

Inlet

Hose

and

Fire

to figures 5-87 through 5-84.

Extinguisher Tube. Refer to figures 5-90

Throttle

Control

Rods

and

Intermediate

through

5-88.

Throttle Lever. Refer to figures 5-83 and 5-82.

7-13.

Turbosupercharger

Base,

Supports,

and

Tie

Rods,

Fuel

Inlet

and

Return

Hoses,

Crankcase

Breather

Tubes,

and

Pipes

Exhaust

Manifolds,

and

Fuel

Injector

Clamps,

Supports, and Tubes

and assembly instructions. References are listed in

Refer to Table 7-9 for illustrations

the table.

Table 7-9. Turbosupercharger Base, Supports, and Tie Rods, Fuel

Inlet and Return Hoses, Crankcase Breather Tubes, Exhaust

Pipes and Manifolds, and fuel Injector Clamps, Supports, and Tubes

References

Component

Para 7-13a, Figs. 5-81 through 5-79

Turbosupercharger Base, Supports, and Tie Rods

Para 7-13b, Figs. 5-77 through 5-71

F u e l Inlet and Return Hoses and Crankcase Breather

Tubes

Para 7-13c, Figs. 5-78, 5-70 through 5-68

Exhaust Pipes and Manifolds

Para 7-13d, Figs. 5-67 through 5-64, 4-86

Fuel Injector Clamps, Supports, and Tubes

Para 7-13e, Figs. 5-63 through 5-61

Fuel Injector Nozzle Fuel Return Tubes

7-23