Flywheel, Transmission Adapter, Crankshaft Oil Seal, and Accessory Drive Gear

5-14. Flywheel, Transmission Adapter,

R e f e r t o T a b l e 5 - 1 1 for illustrations and

d i s a s s e m b l y i n s t r u c t i o n s . F i g u r e references are

Crankshaft Oil Seal, and Accessory Drive

Gear

listed in the table.

Table 5-11. Flywheel Transmission Adapter, Crankshaft Oil Seal,

and Accessory Drive Gear

Figure Reference

Component

Transmission Drive Gearshaft Assembly, Flywheel, and

Transmission Adapter

Crankshaft Oil Seal Housing and Accessory Drive Gear

1. Install three 9 / 16 x 1-3/4 in. bolts (A), used for

attaching transmission drive gearshaft assembly, as

puller screws in puller screw holes provided.

2. Alternately tighten bolts and pull gearshaft from

crankshaft dowel pins. Remove the three bolts from the

Remove

gearshaft.

1. Straighten tabs on three lock plates (A) securing nine

bolts.

Figure 5-160. Removing transmission drive

2. Remove nine bolts (B) and three lock plates attaching

gearshaft assembly using mounting bolts

transmission drive gearshaft assembly and flywheel to

as puller screws.

crankshaft. Discard lock plates.

Install

1. Install three new lock plates (A) and nine bolts (B)

securing transmission drive gearshaft assembly and

flywheel to crankshaft.

2. Bend taps on three lock plates (A) securing nine bolts

(B).

Figure 5-159. Removing or installing trans-

mission drive gearshaft attaching parts.

5-91