Figure 5-164. Removing or installing transmission adapter.

Remove

1. Cut locking wire and remove three drilled head bolts

1. Attach suitable chain hoist in transmission adapter

(A) attaching oil seal retainer to oil seal cap. Remove

lifting eye (A).

retainer.

2. Separate adapter (B) from studs, dowel pine, and

2. Cut locking wire and remove three drilled head bolts

crankcase assembly. Remove adapter.

(B) attaching oil seal retainer to oil seal housing.

3. Remove and discard transmission adapter gasket (C).

Remove retainer.

Install

1. Position a new transmission adapter gasket (C) on

1. Position retainer on oil seal housing. Install three

crankcase assembly.

drilled head bolts (B) securing retainer to housing and

2. Attach a suitable chain hoist in transmission adapter

install locking wire securing bolts.

lifting eye (A).

2. Position retainer on oil seal cap. Install three drilled

3. Position transmission adapter (B) on studs and dowel

head bolts (A) securing retainer to cap and install

pins in crankcase.

locking wire securing bolts.

Figure 5-164. Removing or installing

Figure 5-165. Removing or installing

transmission adapter.

crankshaft oil seal retainers.

5-94