Oil Pump, Oil Tubes, Vibration Damper, Starter and Generator Drive Adapters

4910-795-7951

until

the

crankshaft

and

con-

Note. Do not remove crankcase protectors -

netting rods have been removed (para 5-15).

Figure 5-147. Engine with cylinder assemblies and pistons removed

showing crankcase protectors-4910-795-7951 installed.

5-13. Oil Pump, Oil Tubes, Vibration

Refer to Table 5-10 for illustrations and

Damper, Starter and Generator Drive

d i s a s s e m b l y instructions. Figure references are

Adapters

listed in the table.

Table 5-10. Oil Pump, Oil Tubes, Vibration Damper, Starter and

Generator Drive Adapters

Figure Reference

Component

Oil Pump, Oil Tubes and Oil Pressure Sending Unit and

Switch

Fuel Pump Drive Shaft Coupling and Crankshaft Torsional

Vibration Damper

Starter Drive Adapter and Starter Driven Gear

Generator Drive Adapter and Drive Gearshaft

5-83