Figure 5-150. Removing or installing oil pressure sending unit, oil pressure warning switch and generator air intake tube support brackets

lock washers, and flat washers securing bracket to

Remove

crankcase.

1. Remove oil pressure sending unit (A).

2. Position front support bracket on crankcase and

2. Remove low oil pressure warning switch (B).

install two cap screws (C), lock washers, and flat

3. Remove two cap screws (C), lock washers, and flat

washers securing bracket to crankcase.

washers attaching generator air intake tube front

support bracket to crankcase and remove bracket.

Note. It may be necessary to adjust the

4. Remove two cap screws (D), lock washers, and flat

bracket height when the generator air intake

washers attaching rear support bracket to crankcase

tube is installed.

and remove bracket.

3. Install low oil pressure warning switch (B).

Install

4. Install oil pressure sending unit (A).

1. Position generator air intake tube rear support

bracket on crankcase and install two cap screws (D).

Figure 5-150. Removing or installing oil pressure sending unit, oil

pressure warning switch and generator air intake tube

support brackets.

5-86