Figure 5-149. Removing or installing oil pump assembly.

4. Remove oil pump assembly (D) from crankcase.

Remove

Install

1. Cut locking wire and remove three drilled head cap

1. Position oil pump assembly (D) in crankcase

screws (A) and flat washers attaching oil pump

assembly.

assembly to crankcase.

2. Tighten drilled head cap screw (C) as oil pump is

2. Cut locking wire and remove two drilled head cap

being installed.

screws (B) and flat washers.

3. Install two drilled head cap screws (B) and flat

3. Loosen remaining drilled head cap screw (C) as oil

washers and install locking wire securing screws.

pump assembly is being removed.

4. Install three drilled head cap screws (A) and flat

washers securing oil pump to crankcase and install

N o t e . This cap screw (C) cannot be removed

locking wire securing screws.

until oil pump is disassembled.

Figure 5-149. Removing or installing oil pump assembly.

5-85