Installation. - TM-55-1930-208-240300

TM 55-1930-208-24

d. Repair. Repair of the crankshaft is limited to replacing the oil pump drive gear and crankshaft timing gear.

e. Installation.

(1) Refer to figure 4-43 and install the upper grooved main bearing shells in the block. Apply a light coat of

engine oil to each bearing shell.

(2) Position crankshaft (1) into place in the cylinder block.

(3) Refer to paragraph 4-13 and install main bearing caps.

(4) Refer to paragraph 4-11 and install connecting rod caps.

(5) Refer to paragraph 3-37 and install the oil pan.

(6) Refer to paragraph 4-14 and install the crankshaft front cover.

(7) Refer to paragraph 3-44 and install the flywheel.

(8) Refer to paragraph 3-38 and install the cylinder head.

(9) Secure gear (4) to crankshaft (1) with six lockwashers (3), and six bolts (2). Torque bolts to 35-39 ft-lb (47-53

Nm).

(10) Install crankshaft (1) in cylinder block.

4-17