CRANKSHAFT FRONT COVER.

TM 55-1930-208-24

4-14. CRANKSHAFT FRONT COVER.

This task covers:

a. Removal

b. Installation

INITIAL SET-UP:

Tools Required:

Tool Kit, General Mechanics (Item 1, Appendix B)

Equipment Conditions:

Engine shut down (paragraph 2-11, TM 55-1930-208-10).

Crankshaft pulley removed (paragraph 3-30).

a. Removal. (Refer to figure 4-46).

(1) Remove four screws (1), three screws (2), and three lockwashers (3).

(2) Remove front cover (4) and gasket (5). Discard gasket (5).

b. Installation.

(1) Refer to figure 4-46 and install a new gasket (5) and cover (4).

(2) Secure cover (4) with three lockwashers (3), three screws (2), and four screws (1).

(3) Install crankshaft pulley per paragraph 3-30.

4-60