PAN OIL

TM 55-1930-208-24

3-37. PAN OIL

This task covers:

a. Removal

Cleaning

c. Inspection

d. Installation

INITIAL SETUP:

Tools Required:

Tool Kit, General Mechanic's (Item 1, Appendix B)

Wrench, Torque (Item 71, Appendix B)

Materials Required:

Gasket P/N 5150116

Gasket P/N 840277

Equipment Conditions:

Engine shut down (paragraph 2-11, TM 55-1930-208-10).

Oil drained from crankcase (paragraph 3-1, TM 55-1930-208-10).

a. Removal. (Refer to figure 3-76).

(1) Remove thirty-four bolts (1) and oil pan (2).

(2) Remove and discard gasket (3).

(3) Remove drain plug (4) and gasket (5).

b. Cleaning.

(1) Clean with clean fuel oil (item 9, Appendix C).

(2) Wipe off excess oil and dry.

c. Inspection.

(1) Inspect oil pan for dents and cracks.

(2) Inspect oil pan for warps by placing the oil pan upside-down on a flat surface.

(3) Inspect drain plug and oil pan for damaged threads.

(4) Replace a damaged oil pan.

d. Installation.

(1) Install gasket (5) and drain plug (4).

(2) Install new gasket (3), oil pan (2), and secure with thirty-four bolts (1).

3-132