 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
STARTER MOTOR REPAIR (Sheet 3 of 11)
INSPECT PARTS FOR DAMAGE. REPLACE
5.
AS REQUIRED.
REMOVE DRIVE HOUSING ASSEMBLY (1)
6.
AND PREFORMED PACKING (2).
a. Mark drive housing (1) and shift
housing (3).
b. Remove six screws (4) from drive
housing (1).
c. Remove drive housing (1) and packing (2).
INSPECT
DRIVE HOUSING (1) FOR
7.
DAMAGE.
IF DAMAGED, ASSEMBLE
STARTER
MOTOR (PAGE 9-59) AND
REPLACE
AS REQUIRED.
REMOVE SHIFT HOUSING (3) AND
8.
PREFORMED PACKING (5).
a Remove screw (6) and thrust washer (7)
from end of shaft (8). Mark shift housing
(3) and ring (9).
b Remove five screws (10) and lockwashers
(11) from shift housing (3).
NOTE
If shaft (8) comes out with shift housing (3), set shaft
(8) aside.
c. Remove shift housing (3) from ring (9)
and slide shift housing (3) off shaft (8).
Remove packing (5) from shift housing (3).
9. REMOVE WASHER (12) FROM SHAFT (8).
INSPECT WASHER (12) FOR DAMAGE.
REPLACE AS REQUIRED.
10. REMOVE SHAFT (8) FROM RING (9)
Go on to Sheet 4
9-53
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals