 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
STARTER MOTOR REPAIR (Sheet 2 of 12)
DISASSEMBLY:
1. SCRIBE A STRAIGHT LINE (1) FROM
ELECTRICAL COMMUTATOR END BELL
(2) TO MOTOR FIELD WINDING FRAME
(3) IN LINE WITH OIL FILL PLUG (4).
2. REMOVE ELECTRICAL LEAD (5), TWO
PLUGS (6), AND GASKETS (7).
a. Remove nut (8) and lockwasher (9). Lift
lead (5) from terminal stud (10).
b. Remove nut (11) from terminal stud (12)
and solenoid switch (13). Remove lead (5)
from stud (12).
c. Remove plugs (6) and gaskets (7).
3. INSPECT PLUGS (6) FOR DAMAGE.
REPLACE AS REQUIRED.
4. REMOVE END BELL (2) AND
PREFORMED PACKING (14).
a. Remove two screws (15) holding motor
field winding leads (16) to brushes (17).
b. Remove four screws (18) and lockwashera
(19) from end bell (2).
c. Tap end bell (2). Pry end bell (2) off
motor frame (20).
d. Pull packing (14) off end bell (2).
G O on to Sheet 3
9-29
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals