CHAPTER 8. ENGINE LUBRICATION SYSTEM

TM 9-2835-255-34

CHAPTER 8

ENGINE LUBRICATION SYSTEM

CHAPTER INDEX

PROCEDURE

PAGE

Reduction Gearbox Lubrication System Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Lubricating Oil Tank Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4

REDUCTION GEARBOX LUBRICATION SYSTEM CLEANING (Sheet I of 3)

TOOLS:

General mechanic's tool kit- automotive (SC5180-90-N26)

Industrial goggles (Item 58, Appendix D)

Metal pail (Item 96, Appendix D)

Gloves (Item 87, Appendix D)

PERSONNEL: Two

SUPPLIES:

Dry cleaning solvent (Item 7, Appendix B)

Lockwasher (Item 70, Appendix E) (4 required)

Preformed packing (Item 69, Appendix E)

Wiping rag (Item 14, Appendix B)

EQUIPMENT CONDITION:

Oil tank drained (LO -12)

Cooler inlet or outlet tube assembly (left side) removed (TM 20-1)

Cooler inlet or outlet tube assembly (crossover) removed (TM 20-1)

Cooler inlet and outlet tube assembly (right side) removed (TM 20-1)

Generator oil inlet how removed (TM 20-1)

Generator oil outlet home removed (TM 20-1)

Tube assemblies (oil tank to engine oil pump) removed (TM 20-1)

Tube assembly (oil pump return to cooler - forward) removed (TM 20-1)

Tube assemblies (forward reduction gearbox scavenge) removed (TM 20-1)

Tube assembly (reduction gearbox scavenge - rear) removed (page 6-8)

Tube assembly (reduction gearbox oil feed) removed (TM 20-1)

Tube assembly (reduction gearbox oil feed - forward) removed (TM 20-1)

Tube assembly (reduction gearbox feed) removed (page 6-7)

Oil tank filter assembly removed (TM 20-1)

Fluid filter element (engine oil pump to oil cooler) removed (TM 20-1)

Go on to Sheet 2

Change 6

8-1