TUBE ASSEMBLY (REDUCTION GEARBOX FEED) REPLACEMENT (Sheet 1 of 1)

TM 9-2835-255-34

TUBE ASSEMBLY (REDUCTION GEARBOX FEED) REPLACEMENT

(Sheet 1 of 1)

TOOLS: General mechanic's tool kit: automotive (SC 5180-90-CL-N26)

SUPPLIES: Antiseize compound (Item 2, Appendix B)

Flared conical seal (Item 25, Appendix E)

Gasket (Item 26, Appendix E)

Lockwasher (Item 2, Appendix E) (2 required)

Shortening compound (Item 20, Appendix B)

EQUIPMENT CONDITION: Engine disconnected from transmission (TM 34-1)

REMOVAL:

1. REMOVE TUBE (l).

a. Loosen tube nut (2) and remove tube

assembly (3) from tube (1). Remove flared

conical seal (4).

b. Remove two bolts (5) and lockwashers (6).

Remove tube (1) and gasket (7).

2. INSPECT PARTS FOR DAMAGE. REPLACE

AS REQUIRED.

INSTALLATION:

1. INSTALL TUBE (1) AND NEW

GASKET (7).

a. Apply shortening to gasket (7) and install

in groove (8) of reduction gearbox

housing (9).

b. Apply antiseize compound to two bolts (5).

Place tube (1) on housing (9) and install

bolts (5) and new lockwashers (6).

c. Install new seal (4) on tube (l). Aline

tubes (1, 3) and tighten nut (2).

2. CONNECT ENGINE TO TRANSMISSION

(TM 34-1).

6-7