REMOVE THERMOCOUPLE WIRING HARNESSES

TM 9-2835-255-34

GAS TURBINE POWER UNIT REPLACEMENT (Sheet 8 of 30)

14. REMOVE THERMOCOUPLE WIRING HAR-

NESSES (1, 2, 3).

Cut safety wire and remove 12 bolts (4) and

12 cable hangers (5).

Remove 12 probes (6) from gas turbine power

unit (7).

NOTE

Wiring harnesses (1, 2, 3) do not have to be

removed from forward header of rear

module sub-assembly (8).

15. INSPECT WIRING HARNESSES (1, 2, 3) FOR

FRAYING OR WORN OUTER SHEATH AND BURNED

OR BROKEN PROBES (6). REPLACE AS REQUIRED

16. CAREFULLY BEND WIRING HARNESSES (1, 2, 3)

BACK AND INSERT PROBES (6) INTO GAS TURBINE

POWER UNIT THERMOCOUPLE PROBE BOSSES

(8).

Go on to Sheet 90

6-69

Change 6