|
|
![]() TM 9-2835-255-34
GAS TURBINE POWER UNIT REPLACEMENT (Sheet 7 of 30)
12. REMOVE COOLING TUBE ASSEMBLY (1), PRE-
FORMED PACKING (2) AND PACKING MATERIAL (3).
Cut safety wire and remove three long bolts
a.
(4), washers (5) and one short bolt (6).
Cut safety wire from two bolts (7'). Using box
b.
end of torque adapter (8), remove bolts (7)
and tube assembly (1).
Remove and discard preformed packing (2)
c.
and packing material (3).
13. INSPECT ALL PARTS FOR DAMAGE. REPLACE
AS REQUIRED.
Go on to Sheet 8
6-68
Change 6
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |