 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
INTERMEDIATE (LOW PRESSURE) HOUSING (TOP HALF) REPLACEMENT
(Sheet 4 of 6)
CAUTION
When working on internal parts of engine, make
sure dirt or any objects do not get in engine.
NOTE
If any vanes (1) came loose during removal, do
step 2.
2. APPLY SMALL AMOUNT OF BEESWAX
ON CROWN (2) OF VANE (1) TO HOLD IN
PLACE.
3. ALINE HOLE IN VANE END (3) WITH
PIN (4) AND PRESS VANE (1) IN
HOUSING (5).
4. INSTALL HOUSING (5), TWO COVERS (6),
AND ATTACH LINK (7).
a. Turn bellcrank (8) all the way to the left
or right.
b. Position housing (5) on engine. Do not
damage or move packing (9) out of
groove (10).
c. Apply antiseize compound to two screws
(11) and seven bolts (12). Loosely install
screws (11) and new nuts (13). Loosely
install bolts (12) and new nuta (14).
d. Apply antiseize compound to 14 bolts (15
Install bolts (15) and new
lockwashers (16).
e. Tighten screws (11) and nuts (13). Tighten
bolts (12) and nuts (14).
f. Apply antiseize compound to four bolts
(17). Install covers (6) and new gaskets
(18) on housing (5) with bolts (17).
g. Aline link (7) on bracket (19). Install pin
(20) and lockpin (21).
Go on to Sheet 5
5-9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals