REMOVE ATTACHING HARDWARE

TM 9-2835-255-34

INTERMEDIATE (LOW PRESSURE) HOUSING (TOP HALF) REPLACEMENT

(Sheet 2 of 6)

d. Bend tab on keywasher (l). Remove bolt

(2), keywasher (l), and spacer (3).

e. Remove bolt (4) and self-locking nut (5).

f. Lift bracket (6) and shaft (7) and remove

spacer (8).

2. REMOVE ATTACHING HARDWARE

(9 THRU 20).

a. Remove two bolts (9), bolt (10), and

three self-locking nuts (11, 12).

b. Remove bolt (13), self-locking nut (14),

two spacers (15), and bracket (16).

c. Remove seven bolts (17) and self-locking

nuts (18).

d. Remove two screws (19) and self locking-

nuts (20).

Go on to Sheet 3

5-7