|
|
TM
9-2835-255-34
3-2. TROUBLESHOOTING - CONTINUED
g. INLET GUIDE VANE
(IGV)
(2) ES-26. IGV SYSTEM BINDS WHEN IGV
S Y S T E M - CONTINUED
ACTUATOR LEVER IS MOVED BY HAND.
- CONTINUED.
CONTINUED FROM STEP 5
A.
Clean and install tube
6
assembly (bottom of IGV
actuator cylinder (TM 20-1).
B. Clean and Install tube
assembly (top of IGV
actuator cyllnder (TM 20-1).
C. Move IGV actuator lever (1)
forward and rearward and
feel for binding.
Does IGV actuator lever move back
and forth without binding?
A.
Line up hole (2) in
feedback controi (3)
with hole (4) in
actuator lever (1). Put
quick-release pln (5) in
feedback control (3) and
actuator lever (1).
B. Line up hole (6) in
actuator lever (1) with
slot in rod (7). Put pin
(8) in actuator lever
(1) and rod (7).
C. P u t w a s h e r ( 9 ) o n p i n
(8), and put new cotter
pin (10) n pin (8).
Replace EMFS (TM 20-1).
: : Verify problem is
solved.
CONTINUED ON NEXT PAGE
3-214
Change 5
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |