Follow-on Maintenance. - TM-9-2815-224-34-P0211

TM 9-2815-224-34&P

Valve Mechanism Maintenance Instructions (Cont)

(30) Check clearance between thrust

washer (32) and shoulder (33) of

camshaft (1). If clearance is less than

0.004 in. (0.1 mm) or greater than 0.018 in.

(0.45 mm), replace camshaft (l).

(31) Check backlash between gears (4 and 5). Minimum backlash is

0.002 in. (0.05 mm). Maximum backlash is 0.010 in. (0.25 mm).

f. Follow-on Maintenance.

(1) Install water pump drive gear (para 10-5).

(2) Install front balance cover (para 7-12).

(3) Install flywheel housing and rear oil seal (para 5-3).

(4) Install cylinder heads (para 3-7).

(5) Remove engine from engine stand (TM 9-2320-279-34).

END OF TASK

7-33