CAMSHAFT END BEARING BUSHING REMOVAL/INSTALLATION.

TM 9-2815-224-34&P

Valve Mechanism Maintenance Instructions (Cont)

7-10. CAMSHAFT END BEARING BUSHING REMOVAL/lNSTALLATION.

This task covers:

a. Removal

c. Follow-on Maintenance

b. Installation

INITIAL SETUP

Models

Equipment Condition

All

TM or Para

Condition Description

Test Equipment

Camshaft end bearings

removed.

None

Special Environmental Conditions

Special Tools

None

General Safety Instructions

Supplies

None

Level of Maintenance

Personnel Required

General Support

MOS 63W, Wheel vehicle repairer

References

None

a. Removal.

NOTE

Do this procedure only if camshaft end

bearing bushings fail inspection specifications

in para 7-9. If one bushing in end bearing has

failed both bushings must be replaced.

(1) Remove two thrust spacers (1) from

camshaft rear end bearing (2).

(2) Remove two bushings (3) from camshaft

front and rear end bearing (4 and 2).