Installation-continued - TM-9-2815-224-34-P0210

TM 9-2815-224-34&P

Valve Mechanism Maintenance Instructions (Cont)

7-9. CAMSHAFT REMOVAL/REPAIR/INSTALLATION (CONT).

(24) Place clean cloth between teeth of camshaft gears (4 and 5).

(25) Tighten nuts (28) on rear end of camshafts (1 and 3) to 300 lb-ft (407 Nm).

(26) Tighten nut (22) on front end of camshaft (3) to 300 lb-ft (407 Nm).

NOTE

Remaining nut on right camshaft is installed with water pump drive gear.

(27) Put two retainers (29) in mounting position on camshaft gears (4 and 5).

(28) Install eight screws (30) in two adapters (31) and retainers (29).

(29) Tighten screws (30) to 40 lb-ft (54 Nm).

7-32