 |
|||
|
|
|||
|
Page Title:
DRAINING OF ENGINE AND COMPONENTS |
|
||
| ||||||||||
|
|
 c. Drain Engine Oil. Place suitable container
beneath engine oil filter drain plug (fig. 105).
Remove drain plug and drain oil cooler. Replace
Lifting the engine for draining and for in-
plug after draining. Remove drain plugs (fig.
stallation in the overhaul stand (fig. 28) is
accomplished using engine lifting sling -8715107
container. Install drain plugs after draining.
able and aids in installing engine on overhaul
d. Drain Fuel. Place a container beneath
stand and tilting engine for draining.
fuel filter assembly (fig. 103). Open vent valves.
113. DRAINING OF ENGINE AND COMPO-
Open drain cock at bottom of primary and final
NENTS
fuel filters and drain fuel. Close drain cocks
after draining.
a. General. Draining of engine coolant, oil,
and fuel before engine disassembly is impor-
tant in maintaining a clean work area. Before
ON OVERHAUL STAND
installing engine in overhaul stand, drain en-
gine as directed in paragraphs b through d
a. Install Engine Mounting Brackets. Lift
below.
engine using sling- 8715107 and spreader -
10912586 (fig. 223) and position engine over
b. Drain Engine Coolant. Place a suitable
overhaul stand -7950189 and cradle -7950198
container below coolant drain cock (fig. 107),
with flywheel toward overhaul stand gear box.
tilt engine so front of engine is higher than
Install the right rear engine mounting bracket -
rear. Open drain cock and allow coolant to
10899188 and left rear engine mounting bracket
drain. Close drain cock after draining.
149
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals