|
|
(1) Figure 198. (A) Remove oil drain plugs
and drain engine oil into a suitable con-
tainer. Replace plugs after draining.
(B) Remove three 3/8 x 1- 1/4 cap
screws and 3/8- inch lock washer and
remove fuel filter bracket. (C) Remove
oil level gage rod from oil gage rod
support.
HEAD NUTS USING WRENCH -8722954.
AND REAR CYLINDER HEAD NUTS
AFTER ENGINE WARMUP.
a . Removal. Remove oil pan and oil pan
gasket and inspect oil pump component as
follows.
132
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |