Reconditioning Container

Figure 8-8. Engine mounting bracket -

Figure 8-7. Pressure relief valve, humidity

installed view.

indicator, and pneumatic valve -

installed view.

8-10. Reconditioning Container

b. Remove the engine from the container using

a. Cleaning. Clean the interior and exterior of

engine lifting multi-leg sling - 4910-919-2884

container using the process in C-1 of MIL-P-

and place engine on suitable supports before

1 1 6 . Remove minor paint scale and rust with a

removing the mounting brackets (fig. 8-8)

power buffer. If major rust exists, remove by

secured to the oil pan. Remove six nuts, washers,

abrasive blasting.

and bolts and remove mounting brackets from

b . Inspection. Inspect interior and exterior of

the oil pan. Retain engine mounting brackets

upper and lower container sections for dents,

and all attaching hardware with container to

cracks, or defective weld. Check mounting

assure availability of all parts when engine

flanges for b e n d s . Bents that do not effect proper

c o n t a i n e r is to be reused. Install all disassembled

alinement of the upper and lower sections of

engine parts, removed from containers, on

container are permissible. Inspect the lower

engines that are to be made operational.

8-14