Inspection and Repair - TM-9-2815-200-350494

Disassemble

1 . Remove two machine bolts (A) and lock washers

attaching cap assembly to left front upper cover and

remove cap.

2. Remove and discard cap gasket (B).

3 . Remove and discard two preformed packings (C)

from cap.

4. Remove and discard preformed packing (D).

5. Remove cap spring (E).

6. Remove machine bolt (F) and remove cap (G).

Assemble

1. Position cap (G) on cap assembly and install machine

bolt (F).

2. Install cap spring (E).

3. Install a new preformed packing (D).

4. Position two preformed packings (C) on cap

assembly.

5. Position a new cap gasket (B) on left front upper

cover.

6 . Install two machine bolts (A) and lock washers,

securing cap assembly to upper cover.

Figure

6-239.

Disassembling

assembling

Figure

6-238.

Disassembling

assembling

oil

level

indicator

tube

cap

(relocated

oil filler and oil level indicator tubes

(improved oil filler indicator tubes

oil filler tube).

with splash pan drain).

Note. Refer to figure 6-238 for disassembly or

(2) Inspect cap shoulder bolts (B, fig. 6-

assembly procedures of the relocated oil filler

237)

for

looseness

damaged

shoulder

area.

tube.

d. Assembly. Refer to figures 6-237 through 6-

b. Cleaning. Refer to paragraph 6-2.

239 for assembly of oil filler and oil level in-

c. I n s p e c t i o n a n d R e p a i r . R e f e r t o p a r a g r a p h s

dicator tubes and caps. Exhaust manifolds and

6-3

and

6-4,

and

(1)

and

(2),

below.

cylinder head oil drain tubes will be assembled

during engine assembly, Chapter 7.

(1) Inspect exhaust manifolds for cracks,

broken welds, damaged bellows, and bent

flanges.

6-200