Figure 4-18. Loosening or tightening oil filler upper and lower tube hose connection (relocated oil filler tube installation).

Similar procedures are required to

Note.

remove the left and right turbosupercharges.

For instructional purposes, removal of the left

turbo supercharger is described. Removal

procedures for the right turbosupercharger are

the same, except for the relocated oil filler tube

Remove

installation and the generator air exhaust tube

1. Remove one bolt (A) attaching upper oil filler tube

and cap.

support bracket to turbosupercharger tie rod.

2. Remove one bolt (B) and lock washer attaching upper

Figure 4-18. Loosening or tightening oil filler

oil filler tube support clamp to tie rod.

upper and lower tube hose connection

3. Remove one bolt (C) and self-locking nut attaching

(relocated oil filler tube installation).

upper oil filler tube support clamp to support bracket.

4. Remove upper oil filler tube (D) from lower left rear

shroud plate.

Install

1. Position upper oil filler tube (D) through aperture in

lower left rear shroud plate. Make cure lower end of

tube enters hose connection (fig. 4-18).

2. Install one bolt (C) and self-locking nut securing

upper oil filler tube support clamp to support bracket.

3. Install one bolt (B) and lock washer securing upper oil

filler tube support clamp to turbosupercharger tie rod.

4. Install one bolt (A) securing upper oil filler tube

support bracket to tie rod.

Figure 4-19. Removing or installing upper

oil filler tube (relocated oil filler tube

installation).

4-10