Install twenty-four self-locking nuts

Install twenty-four self-locking nuts (A). Tighten

nuts evenly to 19 to 23 pound-feet torque.

Reposition transmission, bottom side up. Install

output flange (A), bolt (B), locktab (C), and seal

ring (D).

Install right and left power takeoff covers and

gaskets (A). Secure each cover with six bolts and six

plain washers. Tighten bolts to 15 to 20 pound-feet

torque.

Using torque wrench (A), tighten bolt to 83 to 100

pound-feet torque while holding flange (B) with

tool (C). Remove tool (C).