|
|
TM 9-2520-249-34&P
Table 7-8. Repair Standards (Low-range Planetary Carrier)
Wear limit
Reference
Size and fit
DS/GS
Foldout
Item
Point of measurement
of new parts
maintenance
4
51.1a
Outside diameter of spindle ..................
1.4940 to 1.4945
1.4930
4
51.2a
Thickness of washer .............................
0.0615 to 0.0635
0.0575
4
51.3a
Thickness of spacer..............................
0.0600 to 0.0650
0.0550
4
51.4a
Outside diameter of roller .....................
0.1873 to 0.1875
0.1870
4
51.5a
Inside diameter of pinion ......................
1.8702 to 1.8707
1.8717
4
51.6a
Thickness of spacer..............................
0.0600 to 0.0650
0.0550
4
51.7a
Thickness of washer .............................
0.0615 to 0.0635
0.0575
Section XI. RIGHT AND LEFT CROSS-SHAFT BEARING RETAINERS-REPAIR
7-65. Inspection and Repair
7-62. Description
Refer to paragraph 5-3 for inspection and repair
Refer to paragraph 2-10 for a description of the bearing
recommendations.
retainers and components.
7-66. Repair Standards
NOTE
The right and left bearing retainers require
repair standards.
identical overhaul procedures; therefore, the
right assembly only is described in the
following
disassembly
and
assembly
a. If outer race of right bearing assembly (40)
procedures.
was removed from right bearing retainer (2), install a
new replacement.
a. Do not remove the outer race of right
b. Press the outer race of bearing assembly
bearing assembly (40) from right bearing retainer (2)
(40) until it is firmly seated in retainer (2). The thicker
unless replacement is necessary. If necessary, remove
side of the race must enter retainer first.
the race.
b. Do not remove right sleeve bearing (4)
from right bearing retainer (2).
7-64. Cleaning
Refer to paragraph 5-2 for cleaning recommendations.
Table 7-9. Repair Standards (Right, Left Cross-Shaft Bearing Retainers)
Wear limit
Reference
Size and fit
DS/GS
Foldout
Item
Point of measurement
of new parts
maintenance
5
2a
Inside diameter at bearing surface of ...
6.1790 to 6.1800
6.1805
retainer
5
40a
Outside diameter of bearing outer race .
6.1875 to 6.1885
*
5
2a,
Fit of bearing outer race in retainer .......
0.0075T to 0.0095T
40a
5
4a
Inside diameter of sleeve bearing at......
5.000 to 5.002
5.040
sealrings
7-15
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |