Section XIV. FSG 48, VALVES, AND FSG 49, MAINTENANCE AND REPAIR SHOP EQUIPMENT

TM 746-10

Section XIV. FSG 48, VALVES, AND FSG 49, MAINTENANCE AND

REPAIR SHOP EQUIPMENT

weather-resistant fiberboard boxes, and seal box with

5-91. Valves (70 Pounds or Less)

tape. Mark per paragraph 3-5.

Preserve and pack valves (70 pounds or less) per

5-95. Component Items (70 Pounds or Less)

paragraph 5-11b.

5-92. Valves (More than 70 Pounds)

a. Coat machined surfaces of hydraulic block

assemblies, test block assemblies, blower tool kits,

reciprocating cylinders, and reel and hose assemblies

a. Coat interior surfaces with P-10 and allow to

with P-10. Wrap preserved areas with greaseproof

drain.

barrier material and secure in place with tape.

b. Coat exterior surfaces with P-1.

b. Cushion items with cellulosic cushioning and

c. Seal openings with tape or a combination of

individually pack in weather-resistant fiberboard boxes.

tape and greaseproof barrier material.

Seal box with tape (see figure 5-1). Mark per paragraph

d. Pack in triple-wall, wood, or cleated-plywood

3-5.

boxes. Mark per paragraph 3-5.

5-96. Calibrator Sets and Pressure Testers

5-93. Component Items (5 Pounds or Less)

a. Coat exterior, unpainted, ferrous metal surfaces

a. Coat the interior and exterior surfaces of oil

with P-10. Wrap with greaseproof barrier material and

pumps with P-10, wrap with greaseproof barrier

secure with tape.

material, and secure in place with tape.

b. Seal openings with tape or a combination of

b. Cushion oil pumps, leakage testers, hose test

tape and greaseproof barrier material.

blocks, panel indicators, oil pump assemblies, and test

block assemblies with cellulosic cushioning material and

5-97. Rack Railway Valves

individually unit pack submethod IC-1.

Mark per

paragraph 3-5.

Coat unprotected metal surfaces with P-1.

5-94. Body, Pneumatic Gun, and Panel Assemblies

Coat unprotected metal surfaces with P-1, pack in

Section XV. FSG 54, PREFABRICATED STRUCTURES AND SCAFFOLDING

5-98.

Inflatable

Structures

and

Structural

fitting plates, ejection plugs, outboard motor brackets,

Components

and extrusion decks with P-1.

b. Pack items in weather-resistant fiberboard

a. Disassemble inflatable T-section corridors, end

boxes or wood boxes subject to the weight limitations of

panel assemblies, inflatable shelters, and air chambers

the containers. Mark per paragraph 3-5.

per TM 10-5410-222-13.

b. Fold items per the folding instructions provided

5-100. Net Rope Assemblies

for placement in shelter containers.

Individually pack nets in weather-resistant fiberboard

c. Cushion with cellulosic cushioning material

boxes. Mark per paragraph 3-5.

those metal surfaces which may chafe the parts when

folded.

5-101. Hydraulic Cylinders

d. Pack items in shelter containers when available.

When shelter containers are not provided, pack items in

Preserve and pack hydraulic cylinders per paragraph 5-

cleated-plywood boxes. Mark per paragraph 3-5.

11.

5-99. Component Hardware

5-102. Axle and Carrier, Transmission and Marine-

drive Assemblies

a. Coat unpainted, ferrous metal surfaces of

Preserve and pack items per paragraph 5-18.

5-13