Section XIII. FSG 44, FURNACE, STEAM PLANT, DRYING EQUIPMENT, AND NUCLEAR REACTORS; FSG 45, PLUMBING, HEATING, AND SANITATION EQUIPMENT; AND FSG 46, WATER PURIFICATION AND SEWAGE TREATMENT EQUIPMENT

TM 746-10

5-82. Intercoolers

c. Cushion items with cellulosic cushioning

material and individually pack in weather-resistant

fiberboard boxes. Close and seal box with tape (fig 5-

a. Coat exposed, unpainted, metal surfaces with

1). Mark per paragraph 3-5.

P-1.

b. Seal openings with tape.

5-85. Valve Assemblies

5-83. Compressor Rotor Assembly Blowers and

Preserve and pack valve assemblies per paragraph 5-

Coolers (70 Pounds or Less)

11.

a. Coat exposed, machined surfaces of rotor

5-86. Pumps (Water and Petroleum)

assemblies with P-10, wrap coated surfaces with

greaseproof barrier material, and secure in place with

Preserve and pack pumps per the instructions contained

tape.

in paragraph 4-4.

b. Cushion items with cellulosic cushioning

material and secure in place with tape.

5-87. Filter Separators and Purifiers

5-84. Hydraulic Motor and Oil Pumps and Hydraulic

a. Coat exterior, unpainted, ferrous metal surfaces

Pumps

of items with P-1.

b. Leave water drain valves open for complete

a. Coat interior surfaces with operating fluid and

draining.

allow to drain.

c. Cushion sight gauges with cellulosic cushioning

b. Coat exterior, unpainted, ferrous metal surfaces

material and secure in place with tape.

with P-10. Wrap coated surfaces with greaseproof

d. Seal openings into units, except drain valves,

barrier material and secure in place with tape.

with tape or a combination of tape and greaseproof

barrier material.

Section XIII. FSG 44, FURNACE, STEAM PLANT, DRYING EQUIPMENT, AND

NUCLEAR REACTORS; FSG 45, PLUMBING, HEATING, AND SANITATION

EQUIPMENT; AND FSG 46, WATER PURIFICATION AND SEWAGE TREATMENT

EQUIPMENT

ally pack in weather-resistant fiberboard boxes. Mark

5-88. Miscellaneous Components

per paragraph 3-5.

g. Preserve and pack items not specifically

a. Drain the entire water and fuel system including

identified using instructions for similar-type items

pumps, line strainers, valves, lines, and all connections

possessing the same physical or mechanical

of heat exchangers, exchanger assemblies, core

characteristics.

assemblies, fluid coolers, boilers, and evaporator shell

assemblies. Reassemble fuel systems, leave drain

5-89. Heaters and Compressors

valves open, and dry fuel and water systems with dry

compressed air.

Preserve and pack heaters and compressors per the

b. Preserve water pumps per paragraph 4-4.

instructions contained in section I of chapter 4.

c. Seal openings into units, excluding drain valves,

with tape or a combination of tape and greaseproof

5-90. Oil Burners

barrier material.

d. Cushion gauges with cellulosic cushioning

a. Coat interior and exterior surfaces with P-10,

material and secure in place with tape.

wrap with greaseproof barrier material, and secure in

e. Coat exterior, unpainted metal surfaces with P-

place with tape.

b. Cushion oil burners with cellulosic cushioning

f. Cushion parts weighing 70 pounds or less with

material and individually pack in triple-wall fiberboard

cellulosic cushioning material and individu-

boxes. Seal with tape (fig 5-1). Mark per paragraph 3-

5-12