Section IV. FSG 20, SHIP AND MARINE EQUIPMENT

TM 746-10

bolting, as required, to form compact nonshifting

other similar small items that require a container for safe

bundles. Staple strapping to any convenient wood

and convenient handling and stowing in wood or cleated

blocking or battens.

plywood boxes.

c. Pack loose components, accessories, and any

d. Mark per paragraph 3-5.

Section IV. FSG 20, SHIP AND MARINE EQUIPMENT

5-22. Assemblies; Circle Roller, Auxiliary Ratchet,

5-16. Shafts and Propellers (70 Pounds or Less)

and Gear (5 Pounds or Less)

a. Coat ferrous metal surfaces of shafts and

propellers with P-10, wrap with greaseproof barrier

a. Coat all ferrous metal surfaces with P-10, wrap

material, and secure in place with tape.

with greaseproof barrier material, and secure in place

with tape.

b. Cushion items with cellulosic cushioning

material and individually pack in weather-resistant

b. Cushion items with cellulosic cushioning and

fiberboard boxes. Close and seal box with tape (see fig

individually pack submethod IC-1.

5-1).

5-23. Mechanical Items and Assemblies (70 Pounds

5-17. Shafts and Propellers (More than 70 Pounds)

or Less)

Coat machined, ferrous metal surfaces of shafts and

a. Coat all ferrous metal surfaces of steering

propellers with P-11, wrap with greaseproof barrier

controls, power takeoffs, drive motors, flow dividers,

material, and secure in place with tape. Coat other

helm units, helical gear shafts, steering gears, cylinders,

unpainted or unprotected, ferrous metal surfaces with P-

couplings, propeller pullers, shafts, control units, bevel

gear hubs, and assemblies (e.g., housing, gear, pinion,

and clutch) with P-10. Wrap with greaseproof barrier

5-18.

Assemblies (Transmission, Converter,

material and secure in place with tape.

Differential, Drive, Transfer, Gear, Housing,

b. Coat interior surfaces of hydraulic-type items

Planetary, Axle, Cylinder, and Winch Drums)

with operating fluid.

c. Cushion items with cellulosic cushioning

a. Coat interior surfaces of assemblies with

material and individually pack in weather-resistant

operating lubricant and allow to drain.

fiberboard boxes. Close and seal box with tape (see

b. Coat water coolant passages with P-9 and allow

figure 5-1).

to drain.

5-24. Mechanical Items and Assemblies (More than

c. Coat exposed machined shafts with P-10, wrap

70 Pounds)

with greaseproof barrier material, and secure in place

with tape.

Coat all unpainted, ferrous metal surfaces of clutch

assemblies,

clutches,

steering

nozzles,

stand

d. Coat nonprecision metal surfaces with P-1.

assemblies, rudder assemblies, and nozzle assemblies

e. Seal openings with tape. Cover large openings

with P-10.

Wrap or cover preserved areas with

with greaseproof barrier material and secure in place

greaseproof barrier material and secure with tape.

with tape.

5-25. Curtain (Cockpit)

5-19. Valves (5 Pounds or Less)

Preserve and pack valves per paragraph 5-11a.

Pack cockpit curtains individually by submethod IC-1.

5-20. Valves (70 Pounds or Less)

5-26. Windows (Metal) and Bulwark Assemblies

Preserve and pack valves per paragraph 5-11b.

Cushion items with cellulosic cushioning material and

package individually in weather-resistant fiberboard

5-21. Pumps (Jet Propulsion, Sump, and Cargo

boxes. Close and seal box with tape (fig 5-1).

Well) Preserve and pack pumps per paragraph 4-4.

5-6