|
|
![]() TM 55-8145-203-13&P
Inspect tie-downs. Have any welds at the
tie-downs been broken?
YES
NO
Tie-downs must be re-welded.
Inspect shelves. Do any shelves have
Refer to Paragraph 5.17.
broken welds or evident distortion?
YES
NO
Replace shelves according to
Are all support beams securely
procedures in Paragraph 3.9.
attached to the vertical shelf
supports?
YES
NO
Are all vertical shelf supports securely
Attempt to attach loose support beams to vertical shelf
support. Can all support beams be successfully
attached to the container sides?
installed?
YES
NO
YES
NO
Above procedures should have
Vertical shelf supports must be
Above procedures should have
Replace defective support
detected problem-causing defects.
re-welded. Refer to Paragraph
detected problem-causing defects.
beams. Refer to Paragraph 3.12.
Container is suitable for service.
5.17.
Container is suitable for service.
Is any cargo, shelving, or debris interfering
with the door closing?
YES
NO
Move cargo so it clears door.
Check both doors for severe warpage
Push all shelves back away from
or distortion. Does such damage exist?
doors and remove any debris.
YES
NO
Doors or the parts welded to them
Check door frame for bent or damaged
(lockrod assemblies or hinges) may
areas. Does such damage exist?
need replacement. Refer to Paragraph
YES
NO
5.16.
Major repair is needed. Refer to
Above procedures should have
detected problem-causing defects.
Container is suitable for service.
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |