Cleaning. - TM-55-1930-208-240204

TM 55-1930-208-24

b. Cleaning.

WARNING

Do not breathe cleaning solvent P-D-680 vapors for long periods of time or use

solvent near open flames. To avoid illness, explosion, or fire, only use solvent in

well-ventilated areas away from open flames.

(1) Clean panel and panel cluster with cleaning solvent (item 4, Appendix C).

(2) Allow parts to dry.

c. Inspection. Inspect panel and panel cluster for dents, rust, and broken welds. Replace a damaged panel or

panel cluster.

d. Installation.

(1) Refer to figure 3-99 and install three plugs (21) into panel (22).

(2) Install bracket (20) and secure with lockwasher (19), screw (18), and nut (17).

(3) Install cover (16) and secure with flat washer (15), screw (14), lockwasher (13), and nut (12).

(4) Install bracket (11) and secure with lockwasher (10) and screw (9).

(5) Position panel (22) on engine and secure with lockwasher (8), screw (7), nut (6), two spacers (5), two

lockwashers (4), and two screws (3).

(6) Position panel cluster (2) on panel (22) and secure with three screws (1).

(7) Install cold weather starting aid control per paragraph 3-23, TM 55-1930-208-10.

(8) Install oil pressure gage per paragraph 3-22, TM 55-1930-208-10.

(9) Install water temperature gage per paragraph 3-21, TM 55-1930-208-10.

(10) Install throttle control per paragraph 3-16.

3-167