PUMP, FUEL.

TM 55-1930-208-24

3-21. PUMP, FUEL.

This task covers:

a. Removal

b. Disassembly

c Cleaning

d. Inspection

e. Repair

f. Reassembly

g. Installation

INITIAL SETUP:

Tools Required:

Tool Kit, General Mechanic's (Item 1, Appendix B)

Tool Set, Fuel Pump (Item 2, Appendix B)

Oil Seal Remover (Item 3, Appendix B)

Oil Seal Installer (Item 4, Appendix B)

Oil Seal Installer (Item 5, Appendix B)

Fuel Pump Holding Fixture (Item 6, Appendix B)

Fuel System Primer (Item 7, Appendix B)

Wrench, Torque (Item 71, Appendix B)

Materials Required:

Gasket P/N 5150193

Gasket P/N 5161003

Grease, Light (Item 11, Appendix C)

Seal P/N 5107223

Solvent, Cleaning (Item 4, Appendix C)

Equipment Conditions:

Engine shut down (paragraph 2-11, TM 55-1930-208-10).

Fuel lines removed.

a. Removal. (Refer to figure 3-45).

(1) Remove three screws (1) and three lockwashers (2).

(2) Remove fuel pump (3) and gasket (4). Discard gasket (4).

(3) Remove drive coupling fork (5).

Figure 3-45. Fuel Pump, Removal/Installation.

3-76