Backing-up Procedure (Part No. 7400050-501 only)

the brake drum.

Make certain that all personnel and equipment are

(b)

clear of the mobilizer during the lowering and

raising operation.

Store pump handle in proper place when not in use.

(c)

When parking mobilizer, allow sufficient free space

(d)

for ease of operation.

Inspect for proper attachment and interconnection of

(e)

the mobilizer and prime mover before towing.

Backing-up Procedure (Part No. 7400050-501 only)

With towbar of Mobilizer approximately perpendicular to front axle,

detach safety chains from towing vehicle and double back with hook

end and connect to pull rings on the outboard ends of the axle.

This triangular configuration of towbar and chains should minimize

side movenmnt during backing. Sharp turns should be avoided. It is

recommended that the driver be given assistance in watching the couple

during the back-up procedure since maximum cramp angle of the towbar

is 40. No manual adjustment of the surbe brake is necessary for backing .

up.