Section V. Service, Inspection, Maintenance Lubrication

Section V

Service, Inspection, Maintenance Lubrication

5.1

Special Service Tools

No special service tools are required.

Periodic Service Inspection

5.2

Figure 1 contains all necessary inspection instructions and

points to be checked. Inspection intervals are provided

in the columns opposite the inspection instructions.

Maintenance

5.3

5.3.1

General

The following paragraphs provide servicing and maintenance

instructions . Only operations that can be performed with

hand tools which are available to the using organization and

which do not require the facilities of overhaul organizations

are considered.

6 MONTHS

WEEKLY

INSPECTION INSTRUCTIONS

AND/OR

5000 MILES

Wheels and Tires

Inspect Tires

Check Tire Pressure

Remove Wheel Bearings, Clean,

Inspect and Pack

Check and Tighten Wheel Nuts

Steering System

Check Wheel Alignment for

Correct Toe In

Check for Bent or Loose Tie Rods

Service Brakes

Check brake adjustment

Check master cylinder for leaks

Check hydraulic fluid level

Test service brakes, adjust

if necessary

Parking Brakes

Test parking brake

Adjust parking brake

Wiring (Part No. 7400017-502 only)

Inspect electrical wiring and

cable for chafing and cracking

Check connectors for fit with

mating parts

Lights (Part No 740017-.5O2 only)

Check operation of lights

(Sht 1 of 1)

Figure 1 - Periodic Service Inspection Chart