 |
|||
|
|
|||
|
Page Title:
FIGURE 450. REMOVING LOCK PLATES USING CLUTCH SPACER PLATE. |
|
||
| ||||||||||
|
|
 c. Remove Lock Plates. Figure 450. (A)
place clutch on clutch spacer plate (fig. 34)
and place in bed of arbor press. (B) Press
clutch down using a suitable bar across clutch
cover as shown with the cross bar clearing all
lock plate cap screws. Press down until springs
are depressed enough to relieve the spring ten-
sion against the lock plates. (C) Remove eight
5/16 x 1/2 self-tapping cap screws securing
lock plates to clutch cover. (D) Remove four
lock plates.
CLUTCH COVER USING FACE SPANNER
WRENCH.
USING CLUTCH SPACER PLATE.
d. Remove Clutch Cover. Figure 451. (A) Re-
move four release lever adjusting nuts using
face spanner wrench socket -8390124. (B) Care-
fully relieve pressure on clutch cover and re-
move cross bar. (C) Lift off clutch cover.
e. Remove Pressure Springs. Refer to figure
PRESSURE SPRINGS FROM PRESSURE
PLATE.
plate.
288
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals