FUEL INJECTION PUMP DRIVE GEAR ACCESS COVER

FIGURE 351. CYLINDER AND CRANKCASE, TIMING GEARS, OIL PAN, AND

RELATED PARTS - EXPLODED VIEW - CONTINUED.

a. Cleaning and Inspection.

place cover when cracked or damaged and when

gasket surfaces are deeply gouged. Replace

(1) Cleaning. Clean fuel injection pump

cover when dowel pin holes are elongated.

drive gear access cover (L) as directed

d. Assembly. Install new crankshaft front oil

seal (U) in timing gear cover following instruc-

(2) Inspection. Inspect injection pump drive

gear access cover (L) as directed in

paragraph 153. Gasket surface must be

smooth and not gouged or damaged.

184. FUEL INJECTION PUMP DRIVE GEAR

S c r e w and stud holes must not be

ACCESS COVER

elongated. Replace cover when distorted

or damaged.

Note. The key letters shown below in paren-

b . Repair. Repair fuel injection pump drive

theses refer to figure 352 except where other-

gear access cover (L) as directed in para-

wise indicated.

graph

219