Figure 5-153. Removing or installing starter drive adapter.

Remove

1. Remove cotter pin (A).

2. Remove slotted nut (B) attaching starter driven gear

to starter driven gearshaft.

Install

Remove

1. Install slotted nut (B) securing starter driven gear to

1. Remove two starter mounting bolts (A).

starter driven gearshaft.

2. Remove four eelf-locking nuts (B) and flat washers

2. Install cotter pin (A).

attaching starter drive adapter (C) to crankcase

Figure 5-154. Removing or installing starter

assembly.

3. Remove adapter (C) from crankcase.

driven gear attaching parts.

4. Remove and discard gasket (D).

Install

1. Install new starter drive adapter gasket (D).

2. Position starter drive adapter (C) on crankcase

assembly.

3. Install four self-locking nuts (B) and flat washers

securing adapter (C) to crankcase.

4. Install two starter mounting bolts (A).

Figure 5-153. Removing or installing

starter drive adapter.

5-88