Figure 5-155. Removing starter driven gear.

Remove

1. Remove self-locking nut (A) and flat washer from

stud.

1. Install three 5 / 16-24 x 3 in. bolts (A) for use as

2. Remove five self-locking nuts (B) and bolts attaching

puller screws into threaded holes provided in starter

generator drive adapter to crankcase assembly.

driven gear (B).

Install

2. Alternately tighten bolts and pull driven gear (B) from

1. Install five self-locking nuts (B) and bolts securing

driven gearshaft.

generator drive adapter to crankcase assembly.

2. Install self-locking nut (A) and flat washer on stud.

Figure 5-155. Removing starter driven gear.

Figure 5-156. Removing or installing

generator drive adapter attach parts-

engines with mounting nuts.

5-89