|
|
![]() TM 9-8140-381-14&P
d. Install cap screw (fig. 3-1) in hole at forward,
f. Install one shoulder screw and spring (fig. 3-1)
in hole at right side of tang receptacle. Using a
right side of tang receptacle. Thread
approximately two turns into bracket using a
1/4-inch
allen
wrench,
thread
screw
approximately two turns into bracket while
5/16-inch allen wrench.
applying pressure to screw and spring.
g. Install second shoulder screw and spring (fig. 3-
1) in hole at rear, right side of receptacle. Using
e. Install second cap screw (fig. 3-1) in hole at
a 1/4-inch allen wrench, thread screw
forward, right side of tang receptacle. Thread
approximately two turns into bracket while
approximately two turns into bracket using a
applying pressure to screw and spring.
5/16-inch allen wrench.
Figure 3-1. Alternate Lock Configuration for Weapon Security Cage, XH4289.
3-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |