REMOTE MONITOR STATION POWER-UP PROCEDURE

TM 9-6920-737-10

REMOTE MONITOR STATION POWER-UP PROCEDURE

This procedure describes power-up of the Remote Monitor Station (RMS) in the Integration Shelter.

In Integration Shelter at Remote Monitor Station (RMS) cabinet (1) note that the POWER AC

AVAILABLE indicator (2) is lit.

Set the POWER ON-OFF circuit breaker (3) to the ON position and observe that the POWER

ON indicator (4) lights.

At the COMMANDER'S VIEW and GUNNER'S VIEW 19-inch color monitors (5), press the

POWER switches (6) and observe that background color appears following a brief warm-up.

At the COMMANDER'S VIEW and GUNNER'S VIEW 19-inch color monitors (5), press in

each DEGAUSS switch (7) and hold for 7 to 10 seconds.

At the 12-inch monochrome monitor (8) set the ON and observe that screen brightness

following a brief warm-up.

NOTE

If monitor screens appear dirty, perform Display Screen Cleaning Procedure (see 3-8).

To continue operation, perform User Log-On Procedure (see 2-131).

Change 2

2-130.4