Assembling Socket to Hose

TM 9-4940-544-14&P

5. Wear proper apparel. Wear safety shoes,

Assembling Socket to Hose

hard hat and safety glasses. No loose clothing

1. Open Top Guard and place socket with large

(unbuttoned jackets or loose sleeve cuffs) or

end outward in chuck (Fig. 3).

jewelry to get caught in moving parts.

2. Tighten socket in chuck using Chuck Wrench

6. Do not overreach. Operate machine from Foot

(Fig 3).

Switch side only. Keep proper footing and bal-

3. Remove Chuck Wrench and close Top Guard

ance, Be sure foot can be removed safely from

(Fig. 3).

Foot Switch at all times. Do not reach across

machine and keep hands, body and tools away

from moving parts.

7. Keep work area clean. Cluttered work areas,

benches, and slippery floors invite accidents

8. Avoid dangerous environment. Do not use

machine in damp and wet locations Keep work

area well Iuminated. Allow sufficient space to

operate machine and accessories properly

and for others to pass safely

9. Keep visitors away. All visitors should be kept

a safe distance from work area

10. Disconnect Power Cord. When not using

machine for any length of time, or before ad-

justing, servicing, or changing Chuck Jaw In-

serts, disconnect Power Cord Cords should be

i n top condition and examined at regular

intervals.

Figure 3. Tightening Socket in Chuck.

4 Clamp hose in vise (Fig. 4). Do not deform

hose by clamping too tight.

Figure 2. Machine Grounding Instructions.

Operating Instructions

Before Operation

Warning 1. Make certain that machine is stable

and that Retaining Ring Assemblies

Figure 4. Clamping Hose in Vise.

(Fig. 4) are securing Vise Carriage

Note: The Selector Switch (Fig. 5) only pre-

onto Support Bars.

pares machine for operation, either for-

2. Operator should be thoroughly fa-

ward or reverse. The Foot Switch must

m i l i a r with Safety Precautions be-

be activated for machine to operate. If

fore attempting to operate this

operator removes his foot from Foot

equipment.

Switch the power unit will automatically

stop.